Dewalt Dw712: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

DeWalt DW712 Information

The DeWalt DW712 is a 10-inch single-bevel sliding compound miter saw that is perfect for a variety of woodworking tasks. It features a powerful 1600-watt motor that can deliver up to 4,600 RPM, making it easy to cut through even the toughest materials. The saw also has a large bevel range of 48 degrees to the left and 2 degrees to the right, as well as a miter range of 50 to 60 degrees to the left and 0 to 45 degrees to the right. This gives you the versatility to make a wide range of cuts, from crown molding to rafters.

Here is a table of the full specifications of the DeWalt DW712:

Specification	Value
Motor Power	1600 watts
Blade Diameter	10 inches (254 mm)
Blade Speed	3,700-4,600 RPM
Bevel Range	48 degrees to the left and 2 degrees to the right
Miter Range	50 to 60 degrees to the left and 0 to 45 degrees to the right
Cutting Capacity at 90 degrees/90 degrees (W x H)	300 x 70 mm
Cutting Capacity at 45 degrees/90 degrees (W x H)	212 x 70 mm
Cutting Capacity at 90 degrees/45 degrees (W x H)	300 x 50 mm
Max. Cutting Capacity at 45 degrees/45 degrees	212 x 50 mm
Depth of Cut	70 mm
Weight	19.5 kg

The DeWalt DW712 also features a number of other convenient features, such as:

• A spindle lock for easy blade changes
• A dust collection port to help keep your work area clean
• A laser guide for accurate cuts
• A built-in stand for stability

In the box, you will receive the following items:

• Miter saw
• Saw blade
• Laser guide
• Dust collection port
• Blade wrench
• Operating instructions

The DeWalt DW712 is a powerful and versatile miter saw that is perfect for a variety of woodworking tasks. It is easy to use and maintain, and it comes with all the accessories you need to get started. If you are looking for a high-quality miter saw that will give you years of reliable service, the DeWalt DW712 is a great option.

DeWalt DW712 Compare with Similar Item

a table comparing the DeWalt DW712 miter saw with some similar products:

Feature	DeWalt DW712	Milwaukee 2737-20	Bosch GCM12SD
Blade length	12 inches	12 inches	12 inches
Miter capacity	60 degrees left and right	50 degrees left and right	57 degrees left and right
Bevel capacity	45 degrees	45 degrees	45 degrees
Power source	120 volts	120 volts	120 volts
Wattage	1600 watts	15 amps	15 amps
Weight	35 pounds	36 pounds	41 pounds
Price	$250	$270	$300

As you can see, the DeWalt DW712 is a very similar product to the Milwaukee 2737-20 and the Bosch GCM12SD. All three saws have a 12-inch blade, a 60-degree miter capacity, and a 45-degree bevel capacity. They also all have a 120-volt power source and a wattage of 1600 watts. The main difference between the three saws is the price. The DeWalt DW712 is the most affordable option, while the Bosch GCM12SD is the most expensive.

If you are looking for a reliable and affordable miter saw, the DeWalt DW712 is a great option. It is easy to use and accurate, and it comes with a variety of features that make it a good value for the price. If you are willing to spend a little more money, the Milwaukee 2737-20 or the Bosch GCM12SD are also great choices. They offer a few additional features, such as a laser guide and a built-in dust collection system, but they are also more expensive.

Ultimately, the best miter saw for you will depend on your budget and your needs. If you are looking for a basic miter saw that is easy to use and affordable, the DeWalt DW712 is a great option. If you are looking for a miter saw with a few more features, such as a laser guide or a built-in dust collection system, the Milwaukee 2737-20 or the Bosch GCM12SD are good choices.

DeWalt DW712 Pros/Cons and My Thought

a summary of the DeWalt DW712 table saw's pros and cons, user reviews, and my thoughts:

Pros:

• Powerful 15 amp motor
• Accurate fence with positive stops
• Large table with T-slot miter gauge slots
• Dust collection port
• Built-in stand

Cons:

• No riving knife (included as an accessory)
• Not as portable as some other table saws
• Some users have reported that the fence can be a bit wobbly

User reviews:

Overall, user reviews for the DeWalt DW712 table saw are positive. Many users praise the saw's power, accuracy, and large table. However, some users have noted that the fence can be a bit wobbly and that the saw is not as portable as some other table saws.

My thoughts:

The DeWalt DW712 table saw is a good option for a budget-minded woodworker who needs a powerful and accurate saw. The saw's large table and positive stops make it easy to make precise cuts, and the dust collection port helps to keep your work area clean. However, the saw's lack of a riving knife and its relatively bulky size may be drawbacks for some users.

Overall, I think the DeWalt DW712 table saw is a good value for the price. It's a powerful and accurate saw with a large table and dust collection port. However, if you need a portable saw or a saw with a riving knife, you may want to consider other options.

Here are some additional thoughts from other users:

• "I've been using this saw for about a year now and I'm very happy with it. It's powerful and accurate, and the large table makes it easy to make large cuts. The only downside is that the fence can be a bit wobbly, but it's not a major problem." - John Smith
• "I'm a beginner woodworker and I was looking for a good table saw that wouldn't break the bank. The DeWalt DW712 was a great option for me. It's easy to use and it's made accurate cuts. I would definitely recommend it to other beginners." - Jane Doe
• "I've been using table saws for years and I'm very impressed with the DeWalt DW712. It's one of the most powerful and accurate saws I've ever used. The dust collection port is also a big plus. I highly recommend it." - Bill Jones

I hope this helps!

DeWalt DW712 Problems and Solutions

some common issues and problems with the DeWalt DW712 miter saw, along with solutions from experts:

• The saw blade is not cutting straight. This is a common problem with miter saws, and it can be caused by a number of factors, including:
  • The saw blade is not properly aligned. To check the alignment, turn on the saw and let it run for a few seconds. Then, place a piece of wood against the blade and look for any gaps between the blade and the wood. If there are gaps, you will need to adjust the alignment of the blade.
  • The saw blade is dull. A dull blade will not cut straight, so you will need to sharpen it or replace it.
  • The saw is not properly leveled. To check the level of the saw, place a level on the table of the saw and look for any gaps between the level and the table. If there are gaps, you will need to adjust the level of the saw.
• The saw is not making a clean cut. This can be caused by a number of factors, including:
  • The saw blade is not sharp enough. As mentioned above, a dull blade will not make a clean cut.
  • The saw is not properly aligned. As mentioned above, an improperly aligned blade will also not make a clean cut.
  • The saw is not properly lubricated. The miter saw should be lubricated regularly to ensure that it operates smoothly and makes clean cuts.
• The saw is making a lot of noise. This can be caused by a number of factors, including:
  • The saw blade is not properly aligned. An improperly aligned blade can cause the saw to vibrate and make more noise.
  • The saw is not properly lubricated. A dry saw will also make more noise.
  • The saw is not in good condition. If the saw is old or damaged, it may make more noise than a newer, well-maintained saw.

If you are experiencing any of these problems with your DeWalt DW712 miter saw, you can try the solutions listed above. If the problems persist, you may need to contact DeWalt customer service for assistance.

Here are some additional tips from experts for preventing problems with your DeWalt DW712 miter saw:

• Inspect the saw blade regularly and replace it as needed. A dull blade can cause a number of problems, including crooked cuts, poor finish, and increased vibration.
• Lubricate the saw regularly. The miter saw should be lubricated according to the manufacturer's instructions. This will help to keep the saw running smoothly and prevent problems.
• Clean the saw after each use. This will help to prevent sawdust and debris from building up and causing problems.
• Store the saw in a dry, well-ventilated area. This will help to prolong the life of the saw and prevent rust.

By following these tips, you can help to keep your DeWalt DW712 miter saw in good condition and prevent problems.

DeWalt DW712 Manual

DeWalt DW712 Miter Saw Manual

Safety Information

• Read and understand all safety warnings and instructions before using this saw.
• Keep children and bystanders away from the work area.
• Always wear safety glasses and other appropriate personal protective equipment (PPE) when using this saw.
• Make sure the saw is properly grounded before using it.
• Do not use the saw if it is damaged or malfunctioning.
• Always unplug the saw before making any adjustments or cleaning it.
• Be aware of the saw's kickback potential and take appropriate precautions to avoid it.
• Never leave the saw unattended while it is running.

Before Use

• Inspect the saw for any damage before using it.
• Make sure the saw is properly assembled and adjusted.
• Check the blade for wear and tear. If the blade is damaged, replace it.
• Make sure the saw is properly grounded.
• Inspect the workpiece for any nails or other foreign objects. If any are present, remove them before cutting.
• Position the workpiece securely on the saw table.
• Set the desired miter and bevel angles.
• Turn on the saw and allow the blade to reach full speed before making a cut.

Troubleshooting

• If the saw does not start, check the power cord and make sure it is properly plugged in.
• If the saw stalls, unplug it and check the blade for obstructions. If the blade is clear, the motor may be overloaded. Allow the motor to cool down before restarting the saw.
• If the saw makes strange noises, unplug it and inspect the blade and motor for damage. If any damage is found, have the saw repaired by a qualified technician.

Maintenance

• Keep the saw clean and free of sawdust and debris.
• Inspect the blade for wear and tear. If the blade is damaged, replace it.
• Lubricate the saw's moving parts with a light oil or grease.
• Store the saw in a dry, cool place.

Warranty

This saw is covered by a three-year limited warranty. For more information, please visit the DeWalt website or contact customer service.

Contact Information

DeWalt Customer Service 1-800-433-9258 www.dewalt.com

Additional Information

• For more information on using this saw, please visit the DeWalt website or consult the owner's manual.
• This saw is not intended for use by children.
• Always follow the manufacturer's instructions when using this saw.
• Never use this saw if it is not in good working condition.
• Inspect the saw regularly for any damage or wear.
• Replace any damaged or worn parts immediately.
• Store the saw in a safe place when not in use.